IECEx(국제방폭상호인증)

이 IECEx 제도는 IEC 규격과 같은 국제 규격들의 요건을 충족시키는 제품을 다루는 국제 인증 제도로서 IECEx 장비 인증 제도는 아래 사항들을 만족해야 한다 인증서 상에 명시된 품목이 규정된 IEC 국제규격에 적합하게 제조된다. 제조자는 IECEx의 특정 요구사항에 적합한 품질경영시스템을 따른다. 제조자는 국제적으로 인정받은 IECEx 인증기관으로부터 계속적인 사후심사를 받는다.

위의 사항들이 만족되는 경우, IECEx 적합인증서 (Certificate of Conformity)가 발행되며, 이를 http://www.iecex.com 을 통해 확인할 수 있다. IECEx 장비 인증 제도는 다음 두 가지를 모두 제공한다. (1) 제조사가 다음의 사항을 성공적으로 만족하여야 부여되는 단일 국제 적합 인증 규격에의 적합성을 증명하기 위한 샘플 시험 및 검사 제조시설의 검사 및 심사 제조시설의 사후관리 심사

규정상 국내 Ex 인증서 또는 승인서가 요구되는 국가를 위한 “신속처리(fast-track)” 이는 IECEx 장비 시험 및 검사 보고서가 국제적으로 인정됨으로써 발행된다. IECEx 장비 인증제도에 의해 발급되는 인증서는 “전자 인증서 (Electronic Certificates)" 로서 IECEx 웹사이트-IECEx “On-Line Certificate” System (http://iecex.iec.ch) 에서 확인할 수 있다. 이로서 공개적 열람 및 인쇄가 가능하다.

textureEx 지역

Ex 지역 (Ex Area)은 “위험 구역 (Hazardous Locations)", "위험 지역 (Hazardous Area)" 또는 ”폭발성 환경 (Explosive Atmosphere)" 이란 명칭으로도 알려져 있다. Ex 지역이란, 가연성 액체, 증기, 가스 또는 가연성 먼지 등의 양이 화재나 폭발을 야기하기에 충분한 장소와 관련이 있다. 현대 자동화 산업은 이러한 Ex 지역을 증가시켜 이러한 환경에서 각종 장비들이 사용되도록 환경을 조성하고 있으며, 이러한 환경에서 사용되는 장비들이 Ex 기기 (방폭기기: Ex equipment)라고 불려진다.

Ex 기기가 사용되는 장소 자동차 연료 충전소 또는 주유소 정유공장 연료/가스 저장 탱크 화학처리 공장 인쇄, 제지, 방직업 병원수술실 항공기 연료 충전소 및 격납고 표면코팅 산업 지하 탄광 하수처리 공장 가스 수송관로 및 기지 곡물 처리 및 저장설비 목재 가공 산업 제당소 경금속가공 산업, 특히 알루미늄 분진 및 입자

texture적용규격

IECEE 회원국 IEC 60079-0: Electrical apparatus for explosive gas atmospheres. Part 0: General requirements IEC 60079-1: Electrical apparatus for explosive gas atmospheres. Part 1: Construction and verification test of flameproof enclosures of electrical apparatus IEC 60079-2: Electrical apparatus for explosive gas atmospheres. Part 2: Electrical apparatus, type of protection 'p' (Pressurization) IEC 60079-5: Electrical apparatus for explosive gas atmospheres Part 5: Powder filling "q" IEC 60079-6: Electrical apparatus for explosive gas atmospheres Part 6: Oil-immersion 'o' IEC 60079-7: Electrical apparatus for explosive gas atmospheres Part 7: Increased safety 'e' IEC 60079-11: Electrical apparatus for explosive gas atmospheres Part 11: Intrinsic safety 'i' IEC 60079-15: Electrical apparatus for explosive gas atmospheres Part 15: Electrical apparatus with type of protection 'n' (Non-Sparking) IEC 60079-18: Electrical apparatus for explosive gas atmospheres Part 18: Encapsulation 'm' IEC 60079-25: Electrical apparatus for explosive gas atmospheres Part 25: Intrinsically safe systems IEC 60079-26: Electrical apparatus for explosive gas atmospheres Part 26: Equipment with equipment protection level (EPL) Ga IEC 60079-27: Electrical apparatus for explosive gas atmospheres Part 27: Fieldbus intrinsically safe concept (FISCO) IEC 60079-28: Explosive atmospheres - Part 28: Protection of equipment and transmission systems using optical radiation IEC 60079-29-1: Explosive atmospheres – Part 29-1: Gas detectors – Performance requirements of detectors for flammable gases IEC 60079-30-1: Explosive atmospheres – Part 30-1: Electrical resistance trace heating - General and testing requirements IEC 61241-0: Electrical apparatus for use in the presence of combustible dust Part 0: General requirements IEC 61241-1: Electrical apparatus for use in the presence of combustible dust Part 1: Electrical apparatus protected by enclosures IEC 61241-1-1: Electrical apparatus for use in the presence of combustible dust Part 1: Electrical apparatus protected by enclosures Section 1: Specification for apparatus IEC 61241-4: Electrical apparatus for use in the presence of combustible dust Part 4: Type of protection 'pD' IEC 61241-11: Electrical apparatus for use in the presence of combustible dust Part 11: Protection by intrinsic safety 'iD' IEC 61241-18: Electrical apparatus for use in the presence of combustible dust Part 18: Protection by encapsulation 'mD' IEC 61779-1: Electrical apparatus for the detection and measurement of flammable gases Part 1: General requirements and test methods IEC 61779-2: Electrical apparatus for the detection and measurement of flammable gases Part 2: Performance requirements for group I apparatus indicating a volume fraction up to 5% methane in ai IEC 61779-3: Electrical apparatus for the detection and measurement of flammable gases Part 3: Performance requirements for group I apparatus indicating a volume fraction up to 100% methane in air IEC 61779-4: Electrical apparatus for the detection and measurement of flammable gases Part 4: Performance requirements for group II apparatus indicating up to 100% lower explosive limit IEC 61779-5: Electrical apparatus for the detection and measurement of flammable gases Part 5: Performance requirements for group II apparatus indicating a volume fraction up to 100% gas IEC 62013-1: Caplights for use in mines susceptible to firedamp Part 1: General requirements - Construction and testing in relation to the risk of explosion IEC 62013-2: Caplights for use in mines susceptible to firedamp Part 2: Performance and other safety-related matters IEC 62086-1: Electrical apparatus for explosive gas atmospheres – Electrical resistance trace heating - Part 1: General and testing requirements

texture인증절차

가. 신청 나. 신청서 작성 요구사항 다. 제품관련 문서 준비 라. 생산 품질 관리 시스템 (QMS) 마. 품질평가 보고서(QAR) 발행 바. 제품의 형식시험 사. 시험 보고서(ExTR) 발행 아. IECEx 적합 인증서 (CoC) 발행/span>

texture기타

ExCB와 ExTL ExCB들은 관련된 여러 ExTL (Ex Test Laboratory)을 이용하고 있는데, ExCB와 ExTL은 IECEx기준에 의해 IECEx System을 운영하는데 적합한지에 대해 평가받아야 한다. ExTL는 인증 시 요구되는 모든 규격을 다룰 수 있어야 한다. 시험이 완료되면 시험 성적서인 ExTR (IECEx Test Report)이 작성된다. 검사성적서 (ExTR)의 발행과 승인에 관한 절차는 OD 009에 기술되어 있다.